As we know, when we connected a drive to the computer, the computer will add its MBR first and then scan all HDD based on the MBR, but if the drive has many bad sectors, it may hang.
DC has a special function which called “Hidden LBA” could avoid this error condition, and the operation is very simple.
Before we hidden LBA, check the MBR:
And then the DBR:
Then we back to control page, try to hidden LBA and check what the difference ensued:
As the above picture, set the number from “0″ to “1″ (MBR is the first sector). Then “SAVE”. Now the hidden operation is finished.
Check original MBR and DBR sectors once more:
We can see both the original MBR and DBR were changed.
Because we hidden the 1 sector, so the DBR should be located to the former sector, the 62 sector:
After that, when we connect a new drive to DC, the computer never scan it any more.
But it would not affect DCEXP to detect the drive and partition:
0 Responses
Stay in touch with the conversation, subscribe to the RSS feed for comments on this post.